|
-
Where - FigAir "Special Event" Server
-
When - Sunday 2pm Server time (look at time on server page ) Race will take approx. 1 hour to complete.
-
Plane - Any default Piper Cub in either fs2004 or FSX - Must be stock standard ie NO AUTO PILOT ALLOWED
-
Weather - Weather will be set by server. Please turn your weather auto updates off.
-
Realism - Setting should be set to Hard with the exception of unchecking the "Allow collisions with other aircraft" button.
-
Fuel - No refueling allowed.
-
Disqualifications - Pausing, Slewing, Higher Sim Rate, Refueling, Crashing, using incorrect runway
This is the planned course:
- C72 = Click "Create a Flight" (or
use the World menu) to start at C72, Runway 31R[Cross Winds - United
States], located at an altitude of 2149ft [655m] (Runway: GRASS) then
wait for starting instructions.
- WA23
= Fly heading 286 for 8.2nm and Touch and Go at WA23, [Pine Bluff -
United States], (altitude: 2021ft [616m]) Runway type: GRAVEL, you may
choose any runway
- 16WA = Fly heading 170 for 10.7nm and Touch and Go at 16WA, [Tightcliff - United States], (altitude: 1854ft [565m]) Runway type: DIRT, you may choose any runway
- 70S = Fly heading 103 for 14.2nm and Touch and Go at 70S, [Mead Flying Service - United States], (altitude: 1900ft [579m]) Runway type: ASPHALT, you may choose any runway
- 63WA = Fly heading 51 for 4nm and Touch and Go at 63WA, [Boyle R&D - United States], (altitude: 2349ft [716m]) Runway type: DIRT, you may choose any runway
- C72
= Fly heading 310 for 14.1nm and land at C72, Runway 31R [Cross Winds -
United States], (altitude: 2149ft [655m]) Runway type: GRASS, You MUST
use Runway 31R
Flight Plans - Updated to include a Saved flight
Feel free to join the server any time and practice the course. Just join the special event server and type ?hop to follow the directions.
Only registered users can write comments. Please login or register. Powered by AkoComment Tweaked Special Edition v.1.4.6 AkoComment © Copyright 2004 by Arthur Konze - www.mamboportal.com All right reserved |